For all measuring, remember to use a steel measuring tape to ensure accuracy.

Inside Mount (IM) Installation

To Find Width :
Measure exact distance between inside surfaces of window frame at the top, middle, and bottom (3 Places) and use the narrowest width. Please kindly make a width reduction of 0.5 cm. For example, if the smallest width measurement is 81.5 cm, please write the order measurement as 81.0 cm (81.5 cm - 0.5 cm).

To Find Height :
Measure exact distance from inside surface at top of window to sill at the left, middle and right [3 places], and use the longest height. If you prefer blinds not to touch the sill, deduct 0.5 cm. If there is no sill, measure height to the point where the blind is to reach.


Pengukuran Lebar :
Ukur jarak bagian dalam kusen dari kanan ke kiri. Pengukuran di mulai dari bagian: atas kusen, tengah & bawah kusen. Cari ukuran yang paling kecil dan kemudian kurangi 0,5 cm. Misalnya, ukuran yang paling kecil adalah 81.5 cm, jadi ukuran yang harus di order adalah 81,5 cm - 0,5 cm = 81 cm.

Pengukuran Tinggi :
Ukur jarak bagian dalam kusen dari atas kebawah. Pengukuran di mulai di tiga bagian : kiri, tengah dan kanan kusen. Jika tidak menginginkan blind menyentuh dasar ambang kusen maka kurangi tingginya dengan 0,5 cm.

Outside Mount (OM) Installation :

To Find Width :
Measure exact distance between the outermost points where the blind is to be placed. To overlap the window, we recommend adding 1 ½" to 3" (3,8 cm to 7,5 cm) on each side. No allowance will be made by the factory.

To Find Height :
Measure exact distance from where the top of the blind will be located to the bottom of window casing or door mounts to cover or overlap the window frame please add 1 ½" to 3" (3,8 cm to 7,5 cm) to the height measurement. Please note that no allowance will be made by factory.


Pengukuran Lebar :
Ukur jarak bagian luar kusen yang terjauh dimana blind ingin ditempatkan. Kemudian tambahkan 1,5" sampai 3" (3,8 cm-7,5 cm) pada masing-masing sisinya.

Pengukuran Tinggi :
Ukur jarak yang tepat dimana ujung blind akan ditempatkan. Kemudian tambahkan 1,5" sampai 3" (3,8 cm-7,5 cm).